208
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
Storing stations
Storing stations manually
1 Select the required memory bank, i.e. FM1, FM2, FMT, or one of the MW
or LW wavebands.
2 Tune into the required station.
3 Press one of the 1 - 6 station buttons > for longer than two seconds to
store the station to that button.
Storing stations automatically (Travelstore)
You can automatically store the six stations with the strongest reception in the
region (only FM). The stations are stored in the FMT memory bank.
Note: Any stations that were previously stored in this memory bank
are deleted in the process.
1 Keep the FM•AM button 4 pressed for longer than two seconds.
✔ The station storing procedure begins. T-STORE appears in the display.
After the process is completed, the station that is stored in memory loca-
tion 1 in the FMT memory bank will be played.
Listening to stored stations
1 Select the memory bank or waveband.
2 Press the 1 - 6 station button > that corresponds to the station you want
to listen to.
NAV
FM
T
T--STORE
R
D
S
L
D
O3 45
p
m
To Next Page
Loading...
