55
Údržba stroje
Wartung
Machine maintenanceseZávady
4.5. Hydraulic, Greases and oils
4.5.1. Gearbox oils
In gearboxes, oil is used for the whole lifetime of the gearbox. We recommend
replacing of the filling oil in case of repair.
Use oils with specification DIN 51517 in the gearboxes. Select the viscosity grade ISO VG
according to the original oil fill.
Recommended oils and quantity according to the type of the band saw
Band saw Gearbox oil Capacity
Individual 620.460 GANC Shell Tivela S 320 3,3 l
Swarf conveyor Shell Tivela S 320 0,075 l
Comparative table of the gearbox oils
Manufacturer
Viscosity grade
ISO VG 100 ISO VG 220 ISO VG 320
BP Energol GR-XP 100 Energol GR-XP 220 Energol GR-XP 320
Castrol
Alpha SP 100
Alpha MW 100
Alpha SP 220
Alpha MW 220
Elf Reductelf SP 100
Reductelf SP 220
Reductelf Synthese 220
Reductelf SP 320
Esso Spartan EP 100 Spartan EP 220 Spartan EP 320
Mobil Mobilgear 627
Mobilgear SHC 220
Mobilgear 630
Mobilgear 632
ÖMV PG 220
Paramo PP 7 Paramo CLP 220 Paramo CLP 320
Shell Shell Omala 100
Shell Omala 220
Shell Tivela S 220
Shell Omala 320
Shell Tivela S 320
Total Carter EP 100 Carter EP 220 Carter EP 320
4.5.2. Lubricant greases
We recommend using lithium based saponified grease, class NGLI-2 for lubrication.
Different greases are mixable, if their oil bases and consistence type are identical.
Comparative table of the lubricant greases:
Manufacturer Type of the lubricant grease
BP Energrease LS - EP
DEA Paragon EP1
Esso
FETT EGL 3144
Beacon EP 1
Beacon EP 2
FINA FINA LICAL M12
Klüber
Microlube GB0
Staburags NBU8EP
Isoflex Spezial
Optimol Optimol Longtime PD 0, PD1, PD2
Shell Aseol AG ASEOL Litea EP 806-077
Attention:
When replacing, use oils recommended by BOMAR or oils, which
has comparable parameters from the other manufacturers.
Do not forget, that mineral and synthetic oils must not be
mixed!
To Next Page
Loading...
Need help?
General
