To Next Page

To Previous Page

Manual version: 1.10 / Jan. 2011

Manual rev.: 1

Údržba stroje

Wartung /

Machine smaintenance

Manufacturer Type of the lubricant grease

Texaco Multifak EP1

4.5.3. Lubrication

There are several placing on the machine, which are necessary to grease periodically. It

secures the right function of the machine.

Lubrication place Lubrication

The guiding cubes leading – grease with oil

from both sides once a week.

The linear guiding of the saw arm –

lubricate with grease once a three months

(see chapter Lubricant greases). Use 3–5g

grease on the every carriage of the linear

guiding. Use the grease gun to the

lubrication. Drive 3–5 times whole line of

the linear guiding during lubrication.

The linear guiding – lubricate with grease

once a three months (see chapter Lubricant

greases). Use 3–5g grease on the every

carriage of the linear guiding. Use the

grease gun to the lubrication. Drive 3–5

times whole line of the linear guiding

during lubrication.