BIS 2.3 - Access Engine Setting up Video Verification | en 129
Bosch Sicherheitssysteme GmbH Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
– After this you can delete detectors for which you do
not require video verification. Select the readers in
the list field Detectors directly at Location and
remove them with the button Delete mapping.
5. Now switch to the menu General Settings and invoke the
dialog Associations.
– Use the New button to create a new entry in the Jobs
tree, and rename this to e.g. Video.
To Next Page
Loading...
