Bosch BIS 2.3 - New User on Existing Workstation; New User on New Workstation

BIS 2.3 - Access Engine User administration | en 63
Bosch Sicherheitssysteme GmbH Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
Assignment of workstation profiles to a new workstation
6.5.2 New user on existing workstation
1. To create a new user, proceed as described in
Section 6.3 Creating new Access Engine users.
2. In the Configuration Browser dialogs ACE workstation
profiles and ACE workstation rights check that at least
one of the user profiles is assigned to the workstation
profile that has been assigned to the workstation.
Figure also shows this assignment.
6.5.3 New user on new workstation
1. To create a new user, proceed as described in
Section 6.3 Creating new Access Engine users.