BIS 2.3 - Access Engine User administration | en 61
Bosch Sicherheitssysteme GmbH Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
6.4.2 User with new profile
If you do not want users to be able to execute all dialogs and
applications on the server workstation, this can be achieved by
assigning new user profiles with reduced rights to the
modifiable WP-Server workstation profile.
1. To do this, first create a new profile by executing the steps
described in Section 6.2.1 Setting up user profiles.
2. Then switch to the ACE workstation profile dialog and
select the WP-Server profile.
– If this profile does not yet have any rights, select the
desired dialogs and applications - also see steps 3 b
and c in Section 6.2.2 Setting up workstation profiles.
– Assign the new user profile to the WP-Server
workstation profile.
– Save your entries by clicking the Apply button.
Since the WP-Server workstation profile is already assigned to
the server workstation, the new user has access to dialogs and
applications of the Access Engine in accordance with the rights
of his/her user profile.
To Next Page
Loading...
