46 en | Setting up additional workstations BIS 2.3 - Access Engine
F.01U.028.713 | V 2.3.0.1 | 2009.11 Installation manual Bosch Sicherheitssysteme GmbH
– Double clicking on the SfmCfgApp.exe entry in the
folder
\\runtime-drive\MgtS\Access Engine\CP\BIN
5.2.5 Creating card layouts
Card layouts can only be created using the relevant application
in the Configuration Browser on the server. These are available
at all workstations that can execute the Access Engine Print
card dialog.
1. Start the Configuration Browser as described in
Section 4.1 Starting the Configuration Browser, Page 24.
2. Switch to the Tools menu and call the application dialog
ACE ....
– To start the actual application click the ... button in
the dialog field.
– A selection dialog with predefined card formats opens
when you click the New button. Select the format you
require and confirm your choice.
– Create the card layout in accordance with your
company requirements.
NOTICE!
You can create any number of card layouts and therefore, for
example, make a distinction between staff and visitor cards or
mark different access right levels by special characteristics.
See the online help for this application for more information
regarding the formatting and design of layouts.
To Next Page
Loading...
