Bosch BIS 2.3 - Set Up Card Personalization

BIS 2.3 - Access Engine Setting up additional workstations | en 41
Bosch Sicherheitssysteme GmbH Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
5.2 Setting up Card Personalization
5.2.1 Software
Install the Card Personalization program from the BIS
installation CD. This need be done only on those individual
computers which you intend to use for creating ID cards.
i
NOTICE!
Don’t start the BIS setup for a workstation installation, but
open the tool BISACECardPersonalization.exe on the CD-
folder \BIS\Tools.