48 en | User administration BIS 2.3 - Access Engine
F.01U.028.713 | V 2.3.0.1 | 2009.11 Installation manual Bosch Sicherheitssysteme GmbH
6 User administration
User administration for the Access Engine controls the access
rights of the workstation users via profiles that define the use
of certain dialogs and programs as well as the scope of data
processing. Profiles can be created and changed individually for
each user or can be assigned to a group of users with the same
areas of activity. At least one profile must be assigned to a user,
so that he can log on to workstations.
Workstations also have profiles.These define among other
things which profile a user must have to be able to log on the
particular workstation. The functionality of user and
workstation profiles is illsutrated in the following sections
before the creation of new users is described on the basis of
certain configurations. The scenarios reflect certain
configurations and conditions. Look for the relevant case for
your current problem to apply it to your special situation - for
example, if you do not need any new profiles but want to create
new users, follow the steps of the example in
Section 6.3 Creating new Access Engine users.
The following dialogs are available in the Administration menu
urof the BIS Configuration Browser in order to set up user and
worstation rights:
Authorizations For setting general user
authorizations in BIS.
Operators For setting up BIS users and seperate
rights for Access Engine.
ACE User Profiles For setting editing rights for Access
Engine dialogs.
ACE Workstation
profiles
For hiding or revealing dialog displays
at workstations.
ACE Workstation rights For assigning users and workstation
profiles to specific workstations.
ACE Workstations For setting up new workstations fot
Access Engine.
To Next Page
Loading...
