BIS 2.3 - Access Engine Setting up additional workstations | en 47
Bosch Sicherheitssysteme GmbH Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
– Save the created layouts using names that everyone
will understand - your colleagues should be able to
work with these names too.
– In order for the layouts to be available on the
workstations, they must be released. When you
release them, they are copied to the directory
Drive:\MgtS\AccessEngine\....
5.2.6 Creating cards
NOTICE!
Having two separate functions for saving and releasing layouts
means that you can create samples and drafts and keep
working on them without them being used in the system.
To Next Page
Loading...
