Bosch BIS 2.3 - Data Backup and Restore; Standalone Server Backup and Restore

BIS 2.3 - Access Engine Backup and Restore | en 135
Bosch Sicherheitssysteme GmbH Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
13 Backup and Restore
13.1 Standalone-Server
13.1.1 Backup
Daily configuration backups are made automatically by the
system.
In addition, a manual configuration backup is recommended
after significant changes to the configuration have been made.
To perform a backup a freely chosen point of time, go to the
Backup / Restore Configuration tab in BIS Manager.
Specify a target directory if you don’t use the default setting
C:\Backup clicking the
button.
Now click the Backup button.
The following dialog will inform you about the progress of the
action.
i
NOTICE!
Backups can only be done during the system runs.