BIS 2.3 - Access Engine User administration | en 49
Bosch Sicherheitssysteme GmbH Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
6.1 Standard users
The installation process creates standard users Administrator
and BIS. These have full editing rights for the Building
Integration System and Access Engine and can log in at any of
the workstations (even at those added later) as long as the
standard settings governing this have not been changed cf. -
Section 5.1.2 Setting up the Configuration Browser.
As with any newly added user these predefined users receive an
initial password identical to the username.
6.2 User and workstation profiles
6.2.1 Setting up user profiles
1. Start the Configuration Browser as described in
Section 4.1 Starting the Configuration Browser, Page 24.
2. In the Administration menu switch to the ACE User
Profiles dialog.
3. Create a new profile by ...
– ... giving the profile a unique name descriptive of its
rights or restrictions, or use the Description field.
– In the list field select the dialogs and applications that
are to be activated for the profile - here you can shift-
click to make multiple selections.
– Set the default entries for a column from No to Yes by
pressing the spacebar.
CAUTION!
These standard users are not customer specific but are
installed as described here on all systems. This represents a
potential security risk.
We therefore recommend that the passwords be changed the
first time the accounts are used.
NOTICE!
In order to activate a dialog (indented entry) for a user profile it
is necessary to activate the menu it belongs to. Otherwise the
dialog, though activated, is not displayed to the user, and hence
not usable.
To Next Page
Loading...
