8 en | Introduction BIS 2.3 - Access Engine
F.01U.028.713 | V 2.3.0.1 | 2009.11 Installation manual Bosch Sicherheitssysteme GmbH
1 Introduction
Starting with a rough overview of the system the following
chapters will describe the installation of the access control
system Access Engine, with its possible variations. This will
enable the installer of the system to install and configure the
system components according to his/her own needs and
wishes.
Figure 1.1 Example configuration - initial setup
The following chapters will now take each of the above
configuration elements in turn and explain their features,
alternatives and options.