Bosch BIS 2.3 - Page 64

64 en | User administration BIS 2.3 - Access Engine
F.01U.028.713 | V 2.3.0.1 | 2009.11 Installation manual Bosch Sicherheitssysteme GmbH
2. To create a new workstation, proceed as described in
Section 5.1.2 Setting up the Configuration Browser, Page 34.
3. Make sure that at least one of the user profiles that
belongs to the new workstation via the workstation
profiles is assigned to the new user - to do so, check the
settings in the ACE workstation profile dialog.
Figure also shows this assignment.