Bosch BIS 2.3 - Page 133

BIS 2.3 - Access Engine Setting up Video Verification | en 133
Bosch Sicherheitssysteme GmbH Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
– Confirm your choice with OK and make sure that the
option Use alarm address is activated for the control.
6. Save all changes and load the configuration via the BIS
Manager.
As a BIS operator you perform video verification as follows.
1. Log into BIS.
–If you receive a Video Access Request in the
messages window...