Bosch BSA 43 Series - Operation; Switching the BSA 43 xx On and Off; Starting Software Modules; Software Module Termination

1 691 606 210 2015-07-29| Robert Bosch GmbH
44 | BSA 43xx | Operationen
4. Operation
4.1 Switching the BSA 43xx on and
off
¶ BSA 43xx switch on and off using the main
switch on the main switch box/electrical cabinet.
1. Switch on the system at the master switch box.
2. Switch on the PC and log onto the Windows operat-
ing system.
3. Double click onto the link on the Desktop.
4. Alternatively the programs can be started by way of
the Windows start menu:
Start >> Programs >> BeissbarthNet >> Start
"The ordermanager and the measurement visualiza-
tion function are started.
i Various background applications are also started
depending on installation. These are displayed in the
order bar at the bottom right. Refer to the following
table.
Icon Explanation
Host manager.
Responsible for starting and ending all BNet ap
-
plications. Establishes communication between
the BNet applications.
Data service.
Central storage service for all BNet applications.
Software license manager.
Valid for all BNet applications.
ASA network gateway.
Link with ASA network.
MLD9 gateway.
Link with headlight aiming device.
File gateway.
Permits import and export of orders by way of
files.
BEA gateway.
Link with exhaust gas tester.
BEA-ES connector.
SL gateway.
Tab. 1: Icons in the order bar
1. Click onto the host manager symbol in the order bar
with the right mouse key.
 A context menu appears.
2. Select the menu position Exit.
3. Wait until all software modules have been termi-
nated.
4. Close down all programs and shut down Windows in
the proper manner.
5. Switch off the system at the master switch box.
"The software modules have been terminated.
4.2 Starting software modules
4.3 Software module termination
4.4 Operating modes
The tests and functions vary depending on the mode
selected:
Mode
Test sequence Save Print Single wheel All wheel
Manual mode (normal operation) M M M M M
Automatic mode A – – – –
Super automatic mode A A A – –
All-wheel super automatic mode A A A A A
Tab. 1: Operating modes
A Automatic
M Manual
– Not possible