1 691 606 210 2015-07-29| Robert Bosch GmbH
68 | BSA 43xx | Fault procedureen
9. Fault procedure
9.1 General information
A warning or fault is displayed in the event of a mal-
function in a system component or a problem with the
test sequence.
Warnings
Warnings are displayed against a blue screen back-
ground.
Warnings can be acknowledged. Restricted BSA 43xx ope-
ration is still possible
following acknowledgement of the warning.
Fault messages
Faults are displayed against a red screen background.
Faults cannot be acknowledged. Operation is no longer
possible after a fault.
9.2 Acknowledgement of warnings
Warnings must be acknowledged by the user to permit
further operation of the BSA 43xx. The following methods
can be used to acknowledge warnings:
¶ With the mouse:
Click onto the button Press Stop.
¶ With the keypad:
Press the Enter key.
¶ With the remote control unit:
Press the STOP button.
BNet Office or SDL is terminated automatically fol-
lowing acknowledgement in the case of serious errors.
To Next Page
Loading...
