Bosch DIVAR 3000 User Manual

– DVR and monitor resistance is not compatible.
– Video transmission is too long or degrading is too large.
– DVR color or brightness setup is incorrect.
Cannot search local records
– HDD malfunction or HDD cable connection is faulty (check HDD info screen for status).
– Upgraded program is not compatible.
– The recorded file has been overwritten.
– Record function has been disabled.
Video is distorted when searching local records
– Video quality setup is too low.
– Program read error, bit data is too small. There is mosaic in the full screen. Please restart
the DVR to solve this problem.
– HDD malfunction or HDD cable connection is faulty (check HDD info screen for status).
– DVR hardware is faulty.
There is no audio when monitoring
– No power to pickup.
– No power to acoustics.
– Audio cable is damaged.
– DVR hardware is faulty.
There is audio when monitoring but there is no audio during playback
– Setup is incorrect. Please enable the audio function
– Corresponding channel has no video input. Playback is not continuous when the screen is
blue.
Time display is incorrect
– Setup is incorrect
– Battery contact is incorrect or voltage is too low.
– LED display is faulty.
DVR cannot control PTZ
– Front panel PTZ error
– PTZ decoder setup, connection or installation is incorrect.
– Cable connection is faulty.
– PTZ setup is incorrect.
– PTZ decoder and DVR protocol is not compatible.
– PTZ decoder and DVR address is not compatible.
– When there are several decoders, please add 120 Ohm between the PTZ decoder A/B
cables furthest end to delete the reverberation or impedance matching. Otherwise the
PTZ control is not stable.
– The distance is too great.
Motion detection function does not work
– Period setup is not correct.
– Motion detection zone setup is not correct.
– Sensitivity is too low.
82
en | Troubleshooting
DIVAR 2000 / DIVAR 3000 / DIVAR
5000
2016.09 | v1.0 | AM18-Q0717 Operation Manual Bosch Security Systems

Bosch DIVAR 3000 Specifications

General

AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	20 W
Storage temperature (T-T)	0 - 93 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	-40 - 70 %
Sustainability certificates	RoHS
Certification	EMC, LVD, UL, cUL, CAN/CSA, BIS, RCM, ACMA EMC, CE, FCC
On/off switch	Yes
Product color	Black, Silver
Rack capacity	-
Bit rate	24000 Kbit/s
Display modes	Live view
Playback modes	Fast play, Forward, Frame by Frame, Reverse, Slow play
Input bandwidth	320 Mbit/s
Number of users	128 user(s)
Recording modes	Manual, Schedule, Stop
Output bandwidth	256 Mbit/s
Maximum resolution	3840 x 2160 pixels
Alarm input channels	16
Video input channels	16 channels
Alarm output channels	3
Supported resolutions	3840×2160, 1920×1080, 1280×1024, 1280×720, 1024×768, 970x576, 704x576, 352x576, 352x288, 176x144, 960x480, 704x480, 352x480, 352x240, 176x120
Video recording modes	720p, 1080p
Video formats supported	H.264, H.265, M-JPEG
RS-232 ports	1
Audio RCA inputs	4
Networking standards	IEEE 802.3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	2
Supported network protocols	HTTP, HTTPS, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS/DDNS, IP Filter, PPPoE, FTP
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Wi-Fi	No
HDD capacity	- GB
HDD interface	Serial ATA
Maximum storage capacity	6 TB
Mobile operating systems supported	Android, iOS

Weight and Dimensions

Depth	323 mm
Width	375 mm
Height	53 mm
Weight	4130 g