Axes, spindles
Negation of position, velocity and torque/force data: This parameter allows
you to reverse the direction of rotation of the motor. If an axis moves in the
"–" direction while it is jogged in "+" direction, "yes" must be selected here.
Fig. 9-6: Basic setting of the axis and spindle – scaling/units
DOK-MTXMIC-EASY*******-CO06-EN-P Bosch Rexroth AG 107/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Commissioning the drives
To Next Page
Loading...
