10 Operating the IndraMotion MTX micro
10.1 HMI control panels VDP80
To facilitate the operation of turning and milling machines, the HMI control
panels VDP80 are available for the IndraMotion MTX micro. In addition to the
screen, these control panels feature all elements required for executing the
standard functions of a machine. The HMI software, the PLC functions and
the elements of the control panel are harmonized with each other such that
the machine can be operated intuitively. The control panels differ in screen
size and in some operating elements.
Fig. 10-1: VDP80 control panel – milling machine
DOK-MTXMIC-EASY*******-CO06-EN-P Bosch Rexroth AG 131/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Operating the IndraMotion MTX micro
To Next Page
Loading...
