Bosch Rexroth IndraMotion MTX micro - Vdp81.1 Fkn-C1-Nn-En

5.4.4 VDP81.1FKN-C1-NN-EN
Electrical data
640x480px
Display
Borings
for panel attachment
Handwheel
ext. connectable VCH02
OP menu keys
6
Protection type
IP 54 (front side) IP20 (back side)
Power supply 24V DC /0,3 A
640x480px
Display resolution
10,4”
Screen size
Fig. 5-10: Technical data of the VDP81.1FKN-C1-NN-EN control panel
The corresponding control panel can be found under chapter 5.4 "HMI con‐
trol panels" on page 37.
Bosch Rexroth AG DOK-MTXMIC-EASY*******-CO06-EN-P40/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Selecting and connecting the hardware