Bosch Rexroth IndraMotion MTX micro - Determining and Optimizing

Expert mode
Fig. 9-29: Expert mode
In the expert mode, select the application type (e.g. machine tool) and the ax‐
is structure (e.g. drive with gear/gear wheel). A damping factor results from
these settings.
In the left of the image, select which settings to optimize. Optimize all data
simultaneously or (if required) only individual data.
9.5.3 Determining and optimizing
Easy startup mode
In the next step, the measurement to calculate the optimum settings is execu‐
ted.
DOK-MTXMIC-EASY*******-CO06-EN-P Bosch Rexroth AG 125/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Commissioning the drives