Bosch Rexroth IndraMotion MTX micro - Special Auxiliary Functions

7.3.6 Special auxiliary functions
The MTX micro features some auxiliary functions with a special function.
These functions are permanently assigned to a specific M-code and cannot
be changed.
Fig. 7-10: Special functions with M-codes
In addition to the special M-codes, there are the following defined auxiliary
functions:
T
The T-function starts the tool search and the preparation in the PLC.
Bosch Rexroth AG DOK-MTXMIC-EASY*******-CO06-EN-P80/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
PLC commissioning