Bosch Rexroth IndraMotion MTX micro - Screens to Set Important Drive Parameters; General Information; Screen for Mechanic Axis Setting

Fig. 9-33: Frequency response analysis for the selected drive
Select the next axis for the optimization until all axes have been set.
9.6 Screens to set important drive parameters
9.6.1 General information
The screens to set important drive parameters can be found under "System"
==> "Para".
9.6.2 Screen for mechanic axis setting
This screen displays some important parameters of available axes. The data
in the white box is editable and the data in the gray box is not editable.
Bosch Rexroth AG DOK-MTXMIC-EASY*******-CO06-EN-P128/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Commissioning the drives