Fig. 12-1: Switching modal states in the adjustment program or action block
● Block pre-run active iCh_SRunAct"iCh_SRunAct"
The signal has an effect together with the "block pre-run" functionality.
Signal level
1: This signal is output as long as the program is processed
during "computation" up to the abort block (target block-1).
0: The signal is active if no "computation" is started in the pro‐
gram.
● Re-entry active "iCh_SRunReEnter"
The signal has an effect together with the "block pre-run" functionality.
DOK-MTXMIC-EASY*******-CO06-EN-P Bosch Rexroth AG 159/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Block search in MTX micro
To Next Page
Loading...
