There is a message text for every message; optionally, a cause-and-remedy
text can also be defined. The length of each message text is limited to 128
characters.
Fig. 7-16: mzatexte file structure
● Texts which cannot be displayed in the ASCII character set
can be entered in UTF8 character coding. When using the
UTF8 format, the text length is shorter for up to 2/3 of the
displayable characters corresponding to the coding effort.
● UTF-8 files are saved to the notepad. Select UTF-8 as cod‐
ing in the "Save As..." dialog. The characters will then be
saved in UTF-8 format. Caution: The NC editor can only edit
ASCII files. These files must be edited externally via the
notepad and then be copied to the system.
DOK-MTXMIC-EASY*******-CO06-EN-P Bosch Rexroth AG 85/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
PLC commissioning
To Next Page
Loading...
