Bosch Rexroth IndraMotion MTX micro - Page 94

Fig. 8-7: MAIN
Open all nodes in the first drive DR[1].
Check the assignment of the drive to the machine:
1. Physical axis name SysDrName
2. Linear / rotary axis SysAxType
3. Sercos address ScsAddr
Fig. 8-8: Basic configuration
Basic setting
Check the basic setting of the machine
Name Path
Number of channels MAIN/NofCh
Number of NC-controlled drives MAIN/NofDr
Number of configurable drives MAIN/NofDrNodes
Physical drive name MAIN/Dr[i]/SysDrName
Bosch Rexroth AG DOK-MTXMIC-EASY*******-CO06-EN-P92/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
NC parameterization