37
Bosch Security Systems 10/22 BLCC615R
Solution 6000-IP
Quick Start Guide
The following macro script operators are available.
Operator Character Operator Meaning
& And
| Or
! Inverted Function
Table 23: Macros Operator Characters
Outputs > Macros >
Scene
MENU 4-8-2
This menu allows you to program the scene for each macro.
A maximum of 8 different scenes can be configured. Macro
scenes can be up to 16 characters long.
Use the [] and [] keys to scroll cursor left and right.
Use the [0] – [9] keys or the [] and [] keys to scroll
characters, then press [OK] to save. Press [OFF] to clear
text from the current cursor position.
Only the following characters are supported when
constructing macro scenes.
Script Character Character Represents
O Output
D Door
A Area
P Part 1
Q Part 2
Z Zone Bypass
M Macro (TBA)
C Countdown
Table 24: Macros Scene Characters
The following macro scene operators are available.
Operator Character Operator Meaning
& And
| Or
! Inverted Function
Table 25: Macro Scene Operator Characters
Outputs > Output Testing >
External Siren Test
MENU 4-9-0
Internal Siren Test
MENU 4-9-1
Strobe Test
MENU 4-9-2
Fire Siren Test
MENU 4-9-3
Comms Programming
Comms > Commands >
Reserved
MENU 5-0-0
Start Direct Link
MENU 5-0-5
Comms > Commands >
Register Customer
MENU 5-0-8
This menu is used to enter the customer registration
number into the control panel. This unique 11 digit
number is generated by the system owner when they
create an account on MyAlarm web site.
This is required for panels using the MyAlarm iFob Control
App. See the MyAlarm website for more information at
www.myalarm.com.au
Comms > Commands >
Register Installer
MENU 5-0-9
This menu is used to enter the installer registration
number into the control panel. This unique 11 digit
number is generated by the installer when they create an
installer account on the MyAlarm web site.
This number should be entered into all panels installed by
the installer allowing them to view all of their panels via
the MyAlarm web site.
Comms > Remote Access >
RAS Security PIN
MENU 5-3-1
1 2 3 4 5 6 7 8
Use keys [0] - [9] to program RAS Security PIN + [OK] to
save.
Comms > Remote Access >
Log Threshold
MENU 5-3-2
7 0
%
Enter 0 - 9 to program log threshold + [OK] to save.
Comms > Remote Access >
User RAS PIN
MENU 5-3-8
0 0 0 0 0 0 0 0
Use keys [0] - [9] to program User RAS Security PIN + [OK]
to save.
To Next Page
Loading...
