27
Bosch Security Systems 10/22 BLCC615R
Solution 6000-IP
Quick Start Guide
Access > Fingerprint >
Add Fingerprint
MENU 1-8-0
Access > Fingerprint >
Delete Fingerprint
MENU 1-8-1
Access > Fingerprint >
Fingerprint Status
MENU 1-8-2
Area Programming
By default the control panel is configured for one area.
Examples given in this document are for Area 1 only. If the
system is configured for more than one area then you will
be prompted on the keypad to select the area you want to
work on.
Areas > Commands >
Area Status
MENU 2-0-0
Turn Area On/Off
MENU 2-0-1
Turn All Areas On
MENU 2-0-2
Turn All Areas Off
MENU 2-0-3
Move To Area
MENU 2-0-4
Chime On/Off
MENU 2-0-5
Chime Mode
MENU 2-0-6
Areas > Area Properties >
Area Name
MENU 2-1-0
S e c u r i t y S y s t e m
Use the [] and [] keys to scroll cursor left and right.
Use the [0] – [9] keys or the [] and [] keys to scroll
characters, then press [OK] to save. Press [OFF] to clear
text from the current cursor position.
Areas > Properties >
General Options
MENU 2-1-1
1 Exit Time Restart N
2 Reset Alarm Memory N
3 Duress Allowed Y
4 Fault ACK Required N
5 One Key Arming Y
6 One Key Part On Y
7 Link To Common Area N
8 One Key Part Off N
Areas > Properties >
Input Options
MENU 2-1-2
1 Non Sequential Y
2 Pulse Count H/Over Y
3 Senior Watch N
4 Reset Smoke On Arming Y
5 Senior Watch In Minutes N
6 Reserved N
7 Reserved N
8 Auto Arm In Part 1 N
Areas > Properties >
Output Options
MENU 2-1-3
1 SPK Beeps Keyfob Y
2 SPK Beeps Key/Sw Y
3 SPK Strobe In Part On Y
4 Alarm On PIN Retry Y
5 Alarm Exit Error N
6 Alarm Key/Sw Tamper Y
7 Reserved N
8 Reserved N
Areas > Properties >
Reporting Options
MENU 2-1-4
1 Report PIN Retry Y
2 Report Exit Error Y
3 Smart Lockout N
4 Reserved N
5 Cancel Report Y
6 Reserved N
7 Op/Cl In Part On N
8 Op/Cl After Alarm N
Areas > Properties >
Strobe Trigger
MENU 2-1-5
1 Audible Burglary Y
2 Silent Burglary N
3 Fire Alarm Y
4 Keyfob On/Off N
5 Keyswitch On/Off N
6 Reserved N
7 24Hr Alarm Y
8 Reserved N
To Next Page
Loading...
