EasyManua.ls Logo

Bosch Solution 6000-IP CC615GWF - Product Specifications; Technical Specifications of Solution 6000-IP

Bosch Solution 6000-IP CC615GWF
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Solution 6000-IP
50
Bosch Security Systems 10/22 BLCC615R
Quick Start Guide
Specifications
Panel Solution 6000-IP (Part Number CC615)
Voltage Input 16-18V AC 50-60Hz - 24VA External Power Adaptor or
220-240V AC to 18V AC 50-60Hz - 24VA Internal Transformer (Primary Power Source)
Continuous Power 1 Amp MAX ( Combined power drawn from Accessory Power(+12V) LAN Power (Module
LAN +) and Output Power (C+) terminals must not exceed 1 amp)
Alarm Power 4 Amp (Total with Primary and Secondary Power Sources Fitted)
Stand-by Battery 12 VDC, 7.2AH sealed rechargeable battery - Panasonic LC-P127R2P or equivalent.
(Secondary Power Source) Dispose of used batteries according to the instructions.
Min Operating Voltage 10.2 VDC
Battery Charger Pulse by pulse charger. (Note: Charge voltage can’t be measured unless battery is fitted.)
Module Connection
(RS485 LAN)
Max total LAN length using multi strand security cable = 300m.
Max total LAN length using 2 pair twisted shielded data cable (Belden 8723) = 1200m.
See the product installation manual for complete wiring instructions.
Temperature 0˚ to 55˚ C
Enclosure Fixing Method CM720B - Small Enclosure
Use appropriate fasteners capable of handling a minimum of 6kg to fix the cabinet
against a sturdy surface using the mounting holes provided.
CM730B - Large Enclosure
Use appropriate fasteners capable of handling a minimum of 12kg to fix the cabinet
against a sturdy surface using the mounting holes provided.
Relative Humidity 5 to 85% non-condensing.
Enclosure Dimensions: P/N: MW720B - (W)385, (H)280, (D)90mm
P/N: MW730B - Large Enclosure (W)385, (H)520, (D)90mm
PWA Dimensions: (W) 235, (H) 85 (H), (D) 40mm
Warranty: 3 years from date of manufacture (return to base)
The following parts are supplied with the panel
(Australian models only - content may differ in export models )
Panel Assembly Includes 1 x Panel PWA
1 x Short Form User Guide
1 x Installer Reference Guide Download Card
1 x Resistor Pack
Resistor Pack Includes 1 x Red Battery Lead
1 x Black Battery Lead
2 x 2-Way Shunts With Handle
1 x Pack PCB Mounting Clips (5 pc/pack)
10 x 3K3 – 0.25W +/- 1% Metal Film Resistors
10 x 6K8 – 0.25W +/- 1% Metal Film Resistors
1 x 3-Way Removable Terminal Block
1 x Product Identification Label
Available Separately Solution 6000-IP Installation Manual Part Number BLCC615I
Solution Link (RAS) Software Part Number: SW500B
Site Manager End User Management Software Part Number: SW501B

Table of Contents

Related product manuals