Solution 6000-IP
40
Bosch Security Systems 10/22 BLCC615R
Quick Start Guide
Comms > IP Reporting >
User Name/Password
MENU 5-6-9
Username
1
Digits
16
Password
1
Digits
16
Use the [] and [] keys to scroll cursor left and right. Use
the [0] – [9] keys or the [] and [] keys to scroll characters,
then press [OK] to save. Press [OFF] to clear text from the
current cursor position.
Comms > IP Format >
IP Reporting Options
MENU 5-6-10
1 Use SIA Format N
2 SIA With Text N
3 32 Bit Checksum N
4 Reserved N
5 Reserved N
6 Reserved N
7 Reserved N
8 Reserved N
Comms > IP Remote Access >
IP Address
MENU 5-7-0
Installer
1
Digits
12
0 0 0 0 0 0 0 0 0 0 0 0
User
1
Digits
12
0 0 0 0 0 0 0 0 0 0 0 0
Use [] and [] keys to scroll cursor, use [0] – [9] keys to
enter IP address, then press [OK] to save when finished.
Comms > IP Remote Access >
IP Port
MENU 5-7-1
Installer 0 7 7 0 1
User 0 7 7 0 1
Enter IP Port - must be 5 digits within the range 0 to
65535. Use [] and [] keys to scroll cursor. Press [OK] to
save.
Comms > IP Remote Access >
IP RAS Options
MENU 5-7-2
1 IP RAS Allowed Y
2 RAS Only If Disarmed N
3 Report IP Session Y
4 Report IP Lockout Y
5 UDP Installer RAS Y
6 UDP User RAS Y
7 Abort RAS On Alarm Y
8 Allow User Functions Y
Comms > IP Remote Access >
RAS Lockout Time
MENU 5-7-3
0 6 0
Seconds
Enter 0 - 255 + [OK] to program the acknowledge wait
time in seconds.
Comms > IP Remote Access >
IPRS Address
MENU 5-7-5
2 0 2 1 2 9 0 8 3 0 5 8
Reserved for factory use. Do not change unless requested
to do so.
Comms > IP Remote Access >
IPRS Port
MENU 5-7-6
0 7 7 0 3
Reserved for factory use. Do not change unless requested
to do so. Must be 5 digits within the range 0 to 65535.
Comms > Comms Test >
Send Test Report
MENU 5-9-0
Comms > Comms Test >
Test Report Time
MENU 5-9-1
Test Time
0 2 : 0 0
H H : M M
Use the [] and [] keys to move to the field then [] and
[] to change. Press [OK] to save or [MENU] to exit without
saving.
Scroll through hours using the [] and [] to
change from am to pm.
To Next Page
Loading...
