M210/M210-LAB User Manual 3
System Specifications
The M210/M210LAB Label Printer has the following specifications:
• Weight 1.66 lbs (0.753 kg)
• Thermal Transfer Print Mechanism, 203 DPI print resolution
• Softplast ABC-style keypad
• Print Width - 0.75-inch (19.1 mm) maximum label width
• Maximum length for labels with alphanumeric characters: 99.9 inches (253.7 cm)
• Maximum characters that can be printed: 50
• Prints up to 1800 1/2-inch x 2-inch (12.7mm x 50.8mm) labels on 6 AA batteries
Physical and Environmental Characteristics
The M210/M210-LAB Label Printer has the following physical and environmental characteristics:
Note: The table below refers to the M210/M210-LAB Label Printer only. Consumable performance
may vary.
*Exposing the printer to direct sunlight is not recommended.
Batteries give their best performance when they are operated at normal room temperature (20 °C ±
5 °C, 68°F ± 41°F).
Physical Metric Units Imperial/U.S. Units
Dimensions 243.84 x 63.5 x 124.46 mm 9.6" x 2.5" x 4.9"
Weight (with battery pack) 0.75 kg 1.66 lbs
Environmental Operation Storage
Temperature* (Printer) 4° to 43° C (40° to 110° F) -18° to 43° C (0° to 110° F)
Relative Humidity (Printer) 20% to 90% (non-condensing) 10% to 90% (non-condensing)
WARNING! Avoid using the system near water, in direct sunlight, or near a
heating device.
WARNING! Do not expose batteries to temperatures above 60° C (140° F).
To Next Page
Loading...
