M210/M210-LAB User Manual 27
Units
The Units setting is used to configure label parameters for the printer. The units are:
• Inches
• Millimeters
Once configured, you do not have to indicate “inches” or “millimeters” (or their globally accepted
abbreviations or marks) when entering numbers in data fields. Likewise, in any scale or range of
measurement field (as found under Label Type), the range of measurements will automatically
configure to the units selected in the Menu function.
To set the default units:
1. Press MENU.
2. Navigate to Units, then press Enter .
3. Navigate to the desired units of measure, then press Enter.
To Next Page
Loading...
