Brady M210 User Manual

M210/M210-LAB User Manual 9
Remove Lithium Battery
Squeeze the finger tabs
located on both sides of the
battery compartment door,
then swing the battery
compartment door up and
out. (The door will come
off.)
Placing your thumb at the
base of the printer, use your
forefingers to gently pull up
on the raised portion of the
battery. This releases the
top of the battery from the
contacts.
Grasp the raised battery
and pull it up and out from
the bottom contact slots.
Finger Tab
Bottom Contact Slot

Brady M210 Specifications

General

Product color	Black, Yellow
Internal memory	16 MB
Built-in barcodes	Code 39, Data Matrix, QR Code
Color	No
Print technology	Thermal transfer
Maximum resolution	203 x 203 DPI
Maximum printing width	16 mm
Battery type	Built-in battery
AC input voltage	110 - 240 V
Maximum label width	19.05 mm
USB port	-
Connectivity technology	Wireless

Weight and Dimensions

Depth	63 mm
Width	114 mm
Height	241 mm
Weight	750 g