Brady M210 User Manual

M210/M210-LAB User Manual 61
Panel Residential (M210)
Allows you to create labels for residential breaker box panel/door using pre-defined or user-defined
terms. Labels print portrait if more than one line is used.
For the best fit on a standard residential breaker box use font size 9 on 0.25 inch (6.35mm) width
media. All labels are printed left justified with the same fixed width and accept up to 15 characters
maximum.
Available labels (listed in order of appearance):
1. Press LABEL TYPE.
2. Using navigation keys, choose Panel Residential, then press Enter .
3. Use the right/left navigation keys to toggle between Yes or No to select YES to print all
30
panel labels or NO to choose specific labels.
4. (Optional) Use the number keys to change the number of copies or the navigation pad to
increase/decrease the number.
Note: When multiple copies are chosen the labels will collate as they print.
A/C Bedroom 4 Kitchen
Alarm Den Dish Washer
Basement Dining Room Microwave
Bathroom 1 Family Room Refrigerator
Bathroom 2 Office Stove
Bathroom 3 Living Room Garage
Master Bedroom Utility Room Exterior
Bedroom 1 Laundry Furnace
Bedroom 2 Dryer Water Heater
Bedroom 3 Washer Smoke Detector

Brady M210 Specifications

General

Product color	Black, Yellow
Internal memory	16 MB
Built-in barcodes	Code 39, Data Matrix, QR Code
Color	No
Print technology	Thermal transfer
Maximum resolution	203 x 203 DPI
Maximum printing width	16 mm
Battery type	Built-in battery
AC input voltage	110 - 240 V
Maximum label width	19.05 mm
USB port	-
Connectivity technology	Wireless

Weight and Dimensions

Depth	63 mm
Width	114 mm
Height	241 mm
Weight	750 g