Brady M210 User Manual

M210/M210-LAB User Manual 32
2 Getting Started
This section describes the process of creating a text label with minimal formatting, using basic editing
techniques, and printing the label.
Entering Text
Before entering label text, be sure the media cartridge is loaded and the power is ON.
The vertical bar on the display screen is the cursor and is the starting point for every label you create.
Begin entering text at the position of the cursor. The cursor moves across the screen as you enter
data. If you want another line of text, press [ENTER] .
Editing Text
If you have entered some text in error or want to change the content or format of your label, edit the
information before printing.
Inserting Text
To insert additional text within a line of text:
1. Using navigation keys, position the cursor at the point where text should be inserted.
2. Enter the text.
Existing data positioned to the right of the cursor moves progressively to the right to make
room for the inserted text. When the end of the line (for the label size) is reached, no more
data can be inserted. The error message “Cannot Fit” displays to indicate that the width of the
label cannot accommodate any more text.
To correct the error, delete some of the text, add another line of text, or decrease the font size.

Brady M210 Specifications

General

Product color	Black, Yellow
Internal memory	16 MB
Built-in barcodes	Code 39, Data Matrix, QR Code
Color	No
Print technology	Thermal transfer
Maximum resolution	203 x 203 DPI
Maximum printing width	16 mm
Battery type	Built-in battery
AC input voltage	110 - 240 V
Maximum label width	19.05 mm
USB port	-
Connectivity technology	Wireless

Weight and Dimensions

Depth	63 mm
Width	114 mm
Height	241 mm
Weight	750 g