Brady M210 User Manual

M210/M210-LAB User Manual 33
Deleting Text
To remove characters, one at a time, from the position of the cursor TO THE LEFT (backwards):
Press Backspace .
If you want to delete characters in the middle of the line of text, use the navigation keys to position the
cursor to the right of the characters you want to delete, then press [BACKSPACE].
Clear Data
The Clear key is used to clear all data from the screen.
To clear data:
Press CLEAR .
Clear removes all data on the label, but leaves the formatting in place (e.g., font size, label type, etc.)
Cancel Functions
Backspace is also used to cancel functions or a menu. When pressing [BACKSPACE] in
the middle of a function, you are walked out of the function a screen at a time. You may have to press
[BACKSPACE] several times to completely exit the function.
Error Messages
If a function does not operate under current conditions, an error or information message displays
indicating the problem and/or offers situational advice. Read the message carefully and follow the
instructions. (A list of error messages can be found in the Troubleshooting section of this manual,
starting on page 67.)

Brady M210 Specifications

General

Product color	Black, Yellow
Internal memory	16 MB
Built-in barcodes	Code 39, Data Matrix, QR Code
Color	No
Print technology	Thermal transfer
Maximum resolution	203 x 203 DPI
Maximum printing width	16 mm
Battery type	Built-in battery
AC input voltage	110 - 240 V
Maximum label width	19.05 mm
USB port	-
Connectivity technology	Wireless

Weight and Dimensions

Depth	63 mm
Width	114 mm
Height	241 mm
Weight	750 g