Brady M210 User Manual

M210/M210-LAB User Manual 28
Cut Mode
Set the Cut Mode default to determine when the printer should pause for cutting. There are two modes
to choose from:
• Cut Between Labels
• Cut at End of Job
In a multiprint job (serialized label, terminal block, breaker box, etc.) cut mode determines if the printer
should pause between each label for cutting the individual labels. If you select Cut at End of Job, all
labels in a serialized sequence, or all labels for each listed block in a terminal or breaker box label
type, will print out as one long string, pausing for cutting only after the last label has been printed.
To set the Cut Mode:
1. Press MENU.
2. Navigate to Cut Mode, then press Enter .
3. Navigate to the desired cut mode, then press Enter.

Brady M210 Specifications

General

Product color	Black, Yellow
Internal memory	16 MB
Built-in barcodes	Code 39, Data Matrix, QR Code
Color	No
Print technology	Thermal transfer
Maximum resolution	203 x 203 DPI
Maximum printing width	16 mm
Battery type	Built-in battery
AC input voltage	110 - 240 V
Maximum label width	19.05 mm
USB port	-
Connectivity technology	Wireless

Weight and Dimensions

Depth	63 mm
Width	114 mm
Height	241 mm
Weight	750 g