Brady M210 User Manual

M210/M210-LAB User Manual 11
Charging the Lithium Ion Battery Pack
The lithium ion battery pack accessory cannot be charged in the printer. The battery pack must be
removed from the printer and charged using the M210-AC AC adapter. To use the printer while
charging the battery, insert 6 AA alkaline batteries in the battery compartment.
Attaching the Adapter to the Battery Pack
1. Insert the round end of the adapter cable into the plug-in port on the lower left side of the
battery pack.
2. Plug the other end of the adapter cord into an electrical outlet.

Brady M210 Specifications

General

Product color	Black, Yellow
Internal memory	16 MB
Built-in barcodes	Code 39, Data Matrix, QR Code
Color	No
Print technology	Thermal transfer
Maximum resolution	203 x 203 DPI
Maximum printing width	16 mm
Battery type	Built-in battery
AC input voltage	110 - 240 V
Maximum label width	19.05 mm
USB port	-
Connectivity technology	Wireless

Weight and Dimensions

Depth	63 mm
Width	114 mm
Height	241 mm
Weight	750 g