Brady M210 - Page 81

M210/M210-LAB User Manual 74
Menu does not display all label
types.
The M210/M210-LAB only
displays the label types that will
work with the installed label
material (cartridge). Fewer label
types are supported when using
pre-sized cartridges.
Insert the proper label material
(cartridge) for the labels you want to
produce.
Examples:
• If using Nylon, Vinyl or Polyester
continuous labels, all labels types will
be shown.
• If using Self-Lam labels the only label
types displayed are Banner
Landscape, Fixed Length and Wire.
• If using Permasleeve labels, the only
label types that will be shown are
Banner Landscape and Fixed Length.
• Only .75-inch media will work with 2D
barcodes.
Cannot change to a different
language.
Pressed a wrong key while in
language setup.
Reset the language. See page 22 for
information on setting a specific
language.
Datamatrix and/or QR code can’t
be entered.
Label type is set to Banner
Portrait.
Set label type to Banner Landscape.
Unable to exit screen or feature. Pressing the CLEAR key only
erases data on the screen.
Press the CLEAR key twice to exit
from a feature or screen.
Text on pre-sized labels is not
positioned correctly.
Sensor is blocked by debris. Remove the cartridge and blow debris
off of the sensor using a can of
compressed air or a lint-free swab.
See page 75.
Problem Cause Corrective Action