2
-
95
42hW-201601
CHAPTER 2 ENGINE3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
2
6.4.26 FUEL SUPPLY PIPE.
Assemble the high pressure pipe.
Tighten nuts between fuel injection pump and
fuel injection valve. Use two wrenches in order
to prevent rotating the relative parts. (Tightening
torque : 2.7 kg-m)
Assemble the fuel line clamp.
1.
2.
3.
6.4.27 OIL FILTER
Assemble the oil îš¿lter using by tool.
If it is new part, put the lubricating oil in the oil îš¿lter.
1.
2.
K25W254A
C865W2A7A
6.4.28 EXHAUST MANIFOLD
Assemble the exhaust manifold with new gasket.
Tighten the bolts and nuts to hold exhaust
manifold. (Tightening torque: 2.7 kg•m)
1.
2.
6.4.29 FUEL FILTER
Assemble the fuel îš¿lter bracket with fuel îš¿lter.
Tighten the bolts to hold the fuel îš¿lter.
Connect the fuel îš¿lter and fuel inlet of fuel injection
pump by using the hose.
Tighten the clamps to hold the hose.
1.
2.
3.
4.
K25W253A
K25W267A
To Next Page
Loading...
Need help?
General
