Braun Perfusor compact plus - Starting and Stopping Infusions

27
Operation
8.5 Activating standby
In the event of longer interruptions, the
user has the option of retaining the set val-
ues and continuing the infusion at a later
time.
Activating standby mode
Q
Syringe inserted and selected
Q
Press and hold the On/O key until
the pump display says it is in standby
mode.
Adjusting device standby time
Q
Press the left arrow key.
Q
Enter the desired time and press OK
to conrm.
Ending standby mode
Q
Press the On/O key or Back key.
Q
Press the Start/Stop key.
The delivery is re-started with the
previously set values.
Any values still missing are automati-
cally calculated and displayed.
Note: In addition to the volume and time
limit, the infusion rate can also be adjusted
in the Overview screen.
Q
Start the infusion with the Start/Stop
key.
8.4 Starting and stopping
the infusion
Q
Values for the treatment set
Q
Press the Start/Stop key to start the
infusion.
The moving arrows in the display and
the green LEDs show that the delivery
is taking place.
Note: The infusion rate set can be changed
during an ongoing infusion by pressing the
OK key.
Q
Interrupt or stop the infusion by press-
ing the Start/Stop key to start a new
therapy.
Note: After stopping the therapy, “Reset
therapy” must be selected in the menu
before a new therapy can be started.