47
Electromagnetic compatibility
17 Electromagnetic
compatibility
Note: In order to meet with the following
compliance levels, only original accessories
and replacement parts may be used. Oth-
erwise, there may be elevated emissions or
reduced device immunity.
Note: If the device is used in a system
involving other devices (e.g. electrosurgery),
this system should be checked to ensure
correct operation of the system.
Note: The device must not be used near a
magnetic resonance imaging unit without
protection.
Note: The device must not be stacked,
placed or used immediately next to or with
other devices, except for B.Braun devices.
The device is designed to be used in the fol-
lowing electromagnetic environment. The
device users and customers should ensure
that it is being operated in such an environ-
ment.
To Next Page
Loading...
