Braun Perfusor compact plus - Using the Drug Database; Hard and Soft Limits

29
Operation
Q
Start the infusion with the Start/Stop
key.
- or -
Q
Conrm the delivery rate by pressing
OK.
The “Overview” screen is displayed.
Q
Select Vol./Time and press OK
to conrm.
Q
Enter the volume or time limit and
press OK to conrm.
Any values still missing are automati-
cally calculated and displayed.
Note: In addition to the volume and time
limit, the infusion rate can also be adjusted
in the Overview screen.
Q
Start the infusion with the Start/Stop
key.
8.7.1 Hard and soft limits
Hard limits
Hard limits are xed thresholds for the rate/
dose/bolus volume and bolus rate stored in
the database. Only values within the hard
limits can be entered.
If an attempt is made to exceed
or go below
a hard limit, the following message appears
on the display :
8.7 Using the drug database
DANGER! Danger to the patient from
incorrectly selected drug.
Q
Ensure that the correct drug has
been selected.
Up to 3,000 freely selectable drug names,
including corresponding therapy data and
information and up to 10concentrations
per drug in 30categories, can be stored.
The data are loaded using a separate PC
programme.
The drug database can be used to select
adrug name with saved therapy data.
The procedure for selecting a drug is
described below:
Q
Pump has just been switched on or
“Reset therapy” has been selected.
Q
Press the Menu key.
The main menu is displayed.
Q
Select Drug and press OK to conrm.
Q
If there is more than one prole avail-
able:
–
Select station and press OK
to conrm.
–
Select patient prole and press OK
to conrm.
Q
Select drug category and press OK
to conrm.
Q
Select drug and press OK to conrm.
Q
If avail able, read the information in
the “Drug info” screen and press OK
to conrm.
Q
If necessary, select concentration and
press OK to conrm.
Q
Read the information in the “Drug”
screen and press OK to conrm.
Q
Enter the delivery rate.