Braun Perfusor compact plus - Resetting the Therapy; Changing the Syringe; Ending the Infusion

32
Operation
8.11 Changing the syringe
Do not remove the syringe if the drive
head claws are closed.
CAUTION! Damage to the syringe/
drive head claws.
Q
Press the Start/Stop key to stop the
infusion.
The green LED turns o.
Q
Ensure adequate protection against
free-ow.
Q
Press the release lever and slide the
drive head to the right.
Q
Pull the syringe holder and turn it to
the left. Hold the syringe while doing
so.
Q
Remove the syringe.
Q
Insert the new syringe, see section 8.2.
Q
Start the infusion, see section 8.4.
8.12 Ending the infusion
Do not remove the syringe if the drive
head claws are closed.
CAUTION! Damage to the syringe/
drive head claws.
Q
Press the Start/Stop key to end the
infusion.
The green LED turns o.
Q
Ensure adequate protection against
free-ow.
Q
Press the release lever and slide the
drive head to the right.
Q
Pull the syringe holder and turn it to
the left. Hold the syringe while doing
so.
Q
Remove the syringe.
Q
Volume changed:
–
If only the rate has been entered,
the remaining time is adjusted.
–
If only the time has been entered,
the rate (or dose rate) is adjusted.
–
If the rate and time have been
entered, the remaining time is
adjusted.
Q
Time changed:
–
If only the rate has been entered,
the remaining volume is adjusted.
–
If only the volume has been
entered, the rate (or dose rate) is
adjusted.
–
If the rate and volume have been
entered, the remaining volume is
adjusted.
8.10 Resetting the therapy
The “Reset therapy” function is used to
delete all currently set therapy data. Anew
therapy can be started.
Note: Reset therapy can only be selected if
the therapy has been stopped.
Q
Press the menu key and select
Reset therapy and press OK
to conrm.
Q
Press the up arrow key to reset the
therapy.