[!]
Notes on safety
(9
0
0
(9
•
(9
(9
~
~
ii
A DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the
wall outlet before opening the face plate of the control box.
Touching areas where high
voltages are present can result in severe injury.
A
cAUTION
Installation
Machin~
installation should only be carried out
(9
Be sure to wear protective goggles and gloves
by a qualified technician. when handling the lubricating
oil and grease,
Contact your Brother dealer or a qualified elec-
so that they do not get into your eyes or onto
your skin, otherwise inflammation can result.
trician for any electrical work that may need
to be done.
Furthermore,
do
not drink the oil
or
eat the
grease under any circumstances, as they can
The.sewing machine weighs more than
200
cause vomiting and diarrhoea.
kg. The
installation should be carried out by
Keep the
oil out of the reach of children.
two or more people.
0
Avoid setting up the sewing machine near
Do not connect the power cord until
installa-
sources of strong electrical noise such as high-
tion is complete, otherwise the machine may frequency welding equipment.
operate if the start switch is pressed by mis-
If this precaution is not taken, incorrect rna-
take, which
could result
in
injury .
chine operation may result.
Be sure to connect the ground.
If the ground
(9
Have two people present to hold the machine
connection is not secure, you run the risk of
head with both their hands when tilting it back
receiving a serious electric shock.
or returning it to its original position.
Sewing
This sewing machine should only be used by
~
Do not touch any of the moving parts or press
operators who have received the neccessary
any objects against the machine
while sew-
training
in
safe use beforehand.
ing, as this may result in personal injury or
The sewing machine should not be used for
damage to the machine.
any applications other than sewing.
0
If an error occurs in machine operation,
or
if
abnormal noises or
smells are noticed, imme-
Attach
all safety devices before using the sew-
diately turn off the power switch. Then con-
ing machine.
If the machine is used without these devices
tact your nearest Brother dealer or a qualified
technician.
attached, injury may
result.
Turn off the
power
switch
at
the following
8
If the machine develops a problem, contact
your nearest Brother
dealer or a qualified tech-
times, otherwise the machine may operate if
nician.
the start switch is pressed by mistake, which
could result
in
injury.
• When not using the machine
• When leaving the machine unattended
BAS-341 E • 342E
To Next Page
Loading...
