A cAUTION
Cleaning
~
Turn off the power switch before starting any
~
Be sure to wear protective goggles and gloves
cleaning
work, otherwise the machine may
when
handling the lubricating oil and grease,
operate if the start switch is pressed by mis-
so that they do not get into your eyes
or
onto
take, which
could result in injury.
your skin, otherwise
inflammation can result.
Furthermore, do not drink the oil
or
eat the
grease under any circumstances, as they can
cause vomiting and diarrhoea.
Keep the
oil out of the reach of children.
Maintenance and inspection
~
Maintenance and inspection
of
the sewing
~
If the power switch and air need to be left on
machine
should only be carried out by a quali-
when carrying out some adjustment, be ex-
fied technician.
tremely careful to observe all safety precau-
0
Ask your Brother dealer or a qualified electri-
tions.
cian to carry out any
main~enance
and inspec-
0
Use only the proper replacement parts
as
tion of the electrical system.
specified by Brother.
~
Turn off the power switch and disconnect the
0
If any safety devices have been removed, be
power cord from the
wall outlet at the follow-
absolutely
sure to re-install them to their origi-
ing times, otherwise the machine may oper-
nal positions and check that they operate cor-
ate if the start switch is pressed by mistake,
rectly before using the machine.
which
could result in injury.
~
Any problems in machine operation which re-
• When carrying out inspection, adjustment
suit from unauthorized modifications to the
and maintenance
machine
will not be covered by the warranty.
• When replacing consumable parts such as
the rotary hook and knife
~
Have two people present to hold the machine
~
Disconnect the air hoses from the air supply
head with both their hands when tilting it back
and wait for the
needle on the pressure gauge
or
returning it to its original position.
to drop to
"0" before carrying out inspection,
adjustment and repair of any parts which use
the pneumatic equipment.
BAS-341 E • 342E
iii
To Next Page
Loading...
