CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-4
3. DISASSEMBLY PROCEDURE
NOTE:
Refer to the subsection 3.27 Harness Winding Form in this Chapter when re-assembling
printer parts.
3.1 AC Cord
(1) Disconnect the AC cord from the printer AC inlet.
Fig. 4-1
3.2 Drum Unit
(1) Press the cover release button, and open the process unit cover ASSY and remove the
drum unit from the printer.
Fig. 4-2
AC cord
AC inlet
Printer
Cover release button
Drum unit
Process unit cover ASSY
To Next Page
Loading...
