HL-1850/1870N SERVICE MANUAL
2-39
5.5.10 About emulation modes
This printer has the following emulation modes.
HP LserJet Mode
The HP LaserJet mode (or HP mode) is the emulation mode in which this printer emulates the
Hewlett-Packard LaserJet laser printer. Many software applications support this type of laser
printer. Using this mode will allow your printer to operate at its optimum performance with
those applications.
BR-Script 3 Mode
BR-Script is an original page description language and a PostScript language emulation
interpreter. This printer supports level 3. The BR-Script interpreter of this printer enables full
and satisfactory control of text and graphics on pages.
See the following commercial manuals for more technical information about PostScript
commands.
• Adobe Systems Incorporated. PostScript Language Reference Manual, 2nd Edition.
Menlo Park: Addison-Wesley Publishing Company, Inc., 1990.
• Adobe Systems Incorporated. PostScript Language Program Design. Menlo Park:
Addison-Wesley Publishing Company, Inc., 1988.
• Adobe Systems Incorporated. PostScript Language Reference Manual. Menlo Park:
Addison-Wesley Publishing Company, Inc., 1985.
• Adobe Systems Incorporated. PostScript Language Tutorial and Cookbook. Menlo Park:
Addison-Wesley Publishing Company, Inc., 1985.
• Adobe Systems Incorporated. PostScript Language Reference Manual, third Edition.
Addison-Wesley Longman, Inc., 1999.
EPSON FX-850 and IBM Proprinter XL Mode
The EPSON FX-850 and IBM Proprinter XL modes are the emulation modes that this printer
emulates to meet the industry-standard for dot matrix printers of their respective manufactures.
Some applications support these dot matrix printer emulations. Use these emulation modes
for optimum performance when printing from those types of applications.
5.5.11 List of factory settings
The following table shows the initial factory default settings.
NOTE:
• The settings are subject to the emulation mode. Effective modes are indicated in
parentheses in the following table.
• The following settings cannot be restored to the factory settings with the RESET menu in
the FACTORY SETTINGS mode: INTERFACE MODE, HRC SETTING, PAGE
PROTECTION, SCALABLE FONT, LOCK PANEL, PAGE COUNTER and local language
for display messages.
• The COPY setting is always restored to the factory setting when the printer is turned off
and on again.
• It is not possible to reset NETWORK setting on the Control panel. If you wish to reset the
print server back to its default factory settings (resetting all information such as the
To Next Page
Loading...
