Brother HL-1870N - Process Unit Cover ASSY

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-27
3.10 Process Unit Cover ASSY
(1) Release the hooks while pushing the process unit cover ASSY slightly inward to remove
the cover by pulling it forward.
Fig. 4-44
(2) Remove the two cup B M3x8 Taptite screws to remove the process unit cover from the
process unit cover ASSY.
(3) Remove the lock lever spring from the process unit cover ASSY and then the P cover lock
lever R and P cover lock lever L from the cover.
Fig. 4-45
Taptite, cup B M3x8
Process unit cover
Lock lever spring
2
1
P cover lock lever L
P cover lock lever R
Process unit cover ASSY
(hook)
Printer
2
1
Process unit cover ASSY